Rancang Bangun Sistem Monitoring Hydrogen Fuel Cells Berbasiskan Industrial Internet of Things
DOI:
https://doi.org/10.53026/6egh5t53Keywords:
IIOT, PEMFC , Hydrogen, PLC, MonitoringAbstract
The Polymer Exchange Membrane Fuel Cell (PEMFC) is considered a promising technology for the hydrogen-based energy transition due to its efficiency and zero emissions. However, maintenance complexity, membrane degradation, and performance instability under dynamic operating conditions remain major challenges. This study discusses the implementation strategy of the Industrial Internet of Things (IIOT) to address these issues through a sensor-based monitoring approach and the use of an IIOT architecture based on ISO/IEC 30162. Voltage, current, power, pressure, and temperature data from sensors will be continuously collected via a Programmable Logic Controller (PLC) connected to a Gateway, which then transmits the data to the IIOT platform. Challenges such as cybersecurity and the selection of reliable communication protocols between devices are also addressed in the implementation. The results of this implementation demonstrate that the integration of IIOT technology with PEMFC creates a more reliable data transmission network architecture
References
[1] P. Arun Kumar, M. Geetha, K. R. Chandran, and P. Sanjeevikumar, “PEM fuel cell system identification and control,” Lect. Notes Electr. Eng., vol. 435, pp. 449–457, 2018, doi: 10.1007/978981-10-4286-7_44.
[2] W. R. W. Daud, R. E. Rosli, E. H. Majlan, S. A. A. Hamid, R. Mohamed, and T. Husaini, “PEM fuel cell system control: A review,” Renew. Energy, vol. 113, pp. 620–638, 2017, doi:10.1016/j.renene.2017.06.027.
[3] F. Dawood, M. Anda, and G. M. Shafiullah, “Hydrogen production for energy: An overview,” Int. J. Hydrogen Energy, vol. 45, no. 7, pp. 3847–3869, 2020, doi: 10.1016/j.ijhydene.2019.12.059.
[4] E. L. Dewi, T. Ismujanto, and G. T. Chandrasa, “Pengembangan dan aplikasi fuel cell,” Pros. Semin. Nas. Teknoin 2008, vol. 3169887, no. 021, pp. A51–A5Dewi, E. L., Ismujanto, T., Chandrasa, G., 2018.
[5] Q. Chen, G. Zhang, X. Zhang, C. Sun, K. Jiao, and Y. Wang, “Thermal management of polymer electrolyte membrane fuel cells: A review of cooling methods, material properties, and durability,” Appl. Energy, vol. 286, no. September 2020, p. 116496, 2021, doi: 10.1016/j.apenergy.2021.116496.
[6] J. C. Kurnia, B. A. Chaedir, A. P. Sasmito, and T. Shamim, “Progress on open cathode proton exchange membrane fuel cell: Performance, designs, challenges and future directions,” Appl. Energy, vol. 283, no. April 2021, 2021, doi: 10.1016/j.apenergy.2020.116359.
[7] S. D. Sonderskov, L. Torok, and S. Munk-Nielsen, “Monitoring performance indicators of PEM fuel cell backup power systems,” INTELEC, Int. Telecommun. Energy Conf., vol. 2018-Octob, 2018, doi:10.1109/INTLEC.2018.8612294.
[8] F. A. S. AL-Taie and A. S. Al-Araji, “Design of a Real-Time Monitoring and Controlling System for the PEM Fuel Cell Model Based on LabVIEW with IoT Technology,” Int. J. Intell. Eng. Syst., vol. 16, no. 4, pp. 611–629, 2023, doi: 10.22266/ijies2023.0831.50.
[9] S. Latif et al., “Deep learning for the industrial internet of things (Iiot): A comprehensive survey of techniques, implementation frameworks, potential applications, and future directions,” Sensors, vol. 21, no. 22, 2021, doi: 10.3390/s21227518.
[10] D. Lou, J. Holler, D. Patel, U. Graf, and M. Gillmore, “The Industrial Internet of Things Networking Framework,” pp. 1–70, 2021.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Ardha Djuwarsa, Chalidia Nurin Hamdani, Astrie Kusuma Dewi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
